New in version 2.4.
The below requirements are needed on the host that executes this module.
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
community | Specifies the community name for the trap destination. | ||
destination | Specifies the address for the trap destination. This can be either an IP address or a hostname. | ||
name required | Name of the SNMP configuration endpoint. | ||
network |
| Specifies the name of the trap network. This option is not supported in versions of BIG-IP < 12.1.0. If used on versions < 12.1.0, it will simply be ignored. The value default was removed in BIG-IP version 13.1.0. Specifying this value when configuring a BIG-IP will cause the module to stop and report an error. The usual remedy is to choose one of the other options, such as management . | |
partition (added in 2.5) | Default: Common | Device partition to manage resources on. | |
password required | The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable F5_PASSWORD .aliases: pass, pwd | ||
port | Specifies the port for the trap destination. | ||
provider (added in 2.5) | Default: None | A dict object containing connection details. | |
ssh_keyfile | Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable ANSIBLE_NET_SSH_KEYFILE . | ||
timeout | Default: 10 | Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | |
server required | The BIG-IP host. You may omit this option by setting the environment variable F5_SERVER . | ||
user required | The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER . | ||
server_port | Default: 443 | The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT . | |
password required | The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable F5_PASSWORD .aliases: pass, pwd | ||
validate_certs bool |
| If no , SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.You may omit this option by setting the environment variable F5_VALIDATE_CERTS . | |
transport required |
| Configures the transport connection to use when connecting to the remote device. | |
server required | The BIG-IP host. You may omit this option by setting the environment variable F5_SERVER . | ||
server_port (added in 2.2) | Default: 443 | The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT . | |
snmp_version |
| Specifies to which Simple Network Management Protocol (SNMP) version the trap destination applies. | |
state |
| When present , ensures that the resource exists.When absent , ensures that the resource does not exist. | |
user required | The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER . | ||
validate_certs bool (added in 2.0) |
| If no , SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.You may omit this option by setting the environment variable F5_VALIDATE_CERTS . |
Note
network
option is not supported on versions of BIG-IP < 12.1.0 because the platform did not support that option until 12.1.0. If used on versions < 12.1.0, it will simply be ignored.pip install f5-sdk
.- name: Create snmp v1 trap bigip_snmp_trap: community: general destination: 1.2.3.4 name: my-trap1 network: management port: 9000 snmp_version: 1 server: lb.mydomain.com user: admin password: secret delegate_to: localhost - name: Create snmp v2 trap bigip_snmp_trap: community: general destination: 5.6.7.8 name: my-trap2 network: default port: 7000 snmp_version: 2c server: lb.mydomain.com user: admin password: secret delegate_to: localhost
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
community list | changed and success | The new community name for the trap destination.Sample: secret |
destination string | changed and success | The new address for the trap destination in either IP or hostname form. Sample: 1.2.3.4 |
network string | changed and success | The new name of the network the SNMP trap is on. Sample: management |
port string | changed and success | The new port of the trap destination.Sample: 900 |
snmp_version string | changed and success | The new snmp_version configured on the remote device.Sample: 2c |
This module is flagged as stableinterface which means that the maintainers for this module guarantee that no backward incompatible interface changes will be made.
This module is flagged as community which means that it is maintained by the Ansible Community. See Module Maintenance & Support for more info.
For a list of other modules that are also maintained by the Ansible Community, see here.
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/bigip_snmp_trap_module.html