New in version 2.7.
The below requirements are needed on the host that executes this module.
| Parameter | Choices/Defaults | Comments |
|---|---|---|
| bond_mode_10g |
| Bond mode for 10GbE configuration. |
| bond_mode_1g |
| Bond mode for 1GbE configuration. |
| dns_nameservers | List of addresses for domain name servers. | |
| dns_search_domains | List of DNS search domains. | |
| gateway_address_10g required | Router network address to send packets out of the local network. | |
| gateway_address_1g required | Router network address to send packets out of the local network. | |
| hostname required | The hostname or IP address of the SolidFire cluster. | |
| ip_address_10g required | IP address for the 10G network. | |
| ip_address_1g required | IP address for the 1G network. | |
| lacp_10g |
| Link Aggregation Control Protocol useful only if LACP is selected as the Bond Mode. Slow - Packets are transmitted at 30 second intervals. Fast - Packets are transmitted in 1 second intervals. |
| lacp_1g |
| Link Aggregation Control Protocol useful only if LACP is selected as the Bond Mode. Slow - Packets are transmitted at 30 second intervals. Fast - Packets are transmitted in 1 second intervals. |
| method required |
| Type of Method used to configure the interface. method depends on other settings such as the use of a static IP address, which will change the method to static. loopback - Used to define the IPv4 loopback interface. manual - Used to define interfaces for which no configuration is done by default. dhcp - May be used to obtain an IP address via DHCP. static - Used to define Ethernet interfaces with statically allocated IPv4 addresses. |
| mtu_10g | Default: 1500 | Maximum Transmission Unit for 10GbE, Largest packet size that a network protocol can transmit. Must be greater than or equal to 1500 bytes. |
| mtu_1g | Default: 1500 | Maximum Transmission Unit for 1GbE, Largest packet size that a network protocol can transmit. Must be greater than or equal to 1500 bytes. |
| password required | Password for the specified user. aliases: pass | |
| subnet_10g required | 10GbE Subnet Mask. | |
| subnet_1g required | 1GbE Subnet Mask. | |
| username required | Please ensure that the user has the adequate permissions. For more information, please read the official documentation https://mysupport.netapp.com/documentation/docweb/index.html?productID=62636&language=en-US. aliases: user | |
| virtual_network_tag | This is the primary network tag. All nodes in a cluster have the same VLAN tag. |
Note
- name: Set Node network interfaces configuration for Bond 1G and 10G properties
tags:
- elementsw_network_interfaces
na_elementsw_network_interfaces:
hostname: "{{ elementsw_hostname }}"
username: "{{ elementsw_username }}"
password: "{{ elementsw_password }}"
method: static
ip_address_1g: 10.226.109.68
ip_address_10g: 10.226.201.72
subnet_1g: 255.255.255.0
subnet_10g: 255.255.255.0
gateway_address_1g: 10.193.139.1
gateway_address_10g: 10.193.140.1
mtu_1g: 1500
mtu_10g: 9000
bond_mode_1g: ActivePassive
bond_mode_10g: LACP
lacp_10g: Fast
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| msg string | success | Success message |
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
This module is flagged as community which means that it is maintained by the Ansible Community. See Module Maintenance & Support for more info.
For a list of other modules that are also maintained by the Ansible Community, see here.
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/na_elementsw_network_interfaces_module.html