New in version 2.2.
Parameter | Choices/Defaults | Comments |
---|---|---|
pn_broadcast_level | Specify a broadcast level in percent. The default value is 100%. | |
pn_clipassword | Provide login password if user is not root. | |
pn_cliswitch | Target switch(es) to run the cli on. | |
pn_cliusername | Provide login username if user is not root. | |
pn_description | Specify a description for the trunk configuration. | |
pn_edge_switch | Specify if the switch is an edge switch. | |
pn_egress_rate_limit | Specify an egress port data rate limit for the configuration. | |
pn_host | Host facing port control setting. | |
pn_jumbo | Specify if the port can receive jumbo frames. | |
pn_lacp_fallback |
| Specify the LACP fallback mode as bundles or individual. |
pn_lacp_fallback_timeout | Specify the LACP fallback timeout in seconds. The range is between 30 and 60 seconds with a default value of 50 seconds. | |
pn_lacp_mode |
| Specify the LACP mode for the configuration. |
pn_lacp_priority | Specify the LACP priority. This is a number between 1 and 65535 with a default value of 32768. | |
pn_lacp_timeout |
| Specify the LACP time out as slow (30 seconds) or fast (4seconds). The default value is slow. |
pn_loopback | Specify loopback if you want to use loopback. | |
pn_loopvlans | Specify a list of looping vlans. | |
pn_mirror_receive | Specify if the configuration receives mirrored traffic. | |
pn_name required | Specify the name for the trunk configuration. | |
pn_pause | Specify if pause frames are sent. | |
pn_port_macaddr | Specify the MAC address of the port. | |
pn_ports | Specify the port number(s) for the link(s) to aggregate into the trunk. Required for trunk-create. | |
pn_routing | Specify if the port participates in routing on the network. | |
pn_speed |
| Specify the port speed or disable the port. |
pn_unknown_mcast_level | Specify an unknown multicast level in percent. The default value is 100%. | |
pn_unknown_ucast_level | Specify an unknown unicast level in percent. The default value is 100%. | |
state required |
| State the action to perform. Use 'present' to create trunk, 'absent' to delete trunk and 'update' to modify trunk. |
- name: create trunk pn_trunk: state: 'present' pn_name: 'spine-to-leaf' pn_ports: '11,12,13,14' - name: delete trunk pn_trunk: state: 'absent' pn_name: 'spine-to-leaf'
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
changed bool | always | Indicates whether the CLI caused changes on the target. |
command str | always | The CLI command run on the target node(s). |
stderr list | on error | The set of error responses from the trunk command. |
stdout list | always | The set of responses from the trunk command. |
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
This module is flagged as community which means that it is maintained by the Ansible Community. See Module Maintenance & Support for more info.
For a list of other modules that are also maintained by the Ansible Community, see here.
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/pn_trunk_module.html