New in version 2.6.
Parameter | Choices/Defaults | Comments | |
---|---|---|---|
aggregate | List of Interfaces definitions. | ||
delay | Default: 10 | Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state argument which are state with values up /down , tx_rate and rx_rate. | |
description | Description of Interface. | ||
enabled bool |
| Interface link status. | |
mtu | Maximum size of transmit packet. | ||
name required | Name of the Interface. | ||
neighbors | Check the operational state of given interface name for LLDP neighbor.The following suboptions are available. | ||
host | LLDP neighbor host for given interface name . | ||
port | LLDP neighbor port to which given interface name is connected. | ||
rx_rate | Receiver rate in bits per second (bps). | ||
speed | Interface link speed. | ||
state |
| State of the Interface configuration, up means present and operationally up and down means present and operationally down
| |
tx_rate | Transmit rate in bits per second (bps). |
Note
- name: configure interface slxos_interface: name: Ethernet 0/2 description: test-interface speed: 1000 mtu: 9216 - name: remove interface slxos_interface: name: Loopback 9 state: absent - name: make interface up slxos_interface: name: Ethernet 0/2 enabled: True - name: make interface down slxos_interface: name: Ethernet 0/2 enabled: False - name: Check intent arguments slxos_interface: name: Ethernet 0/2 state: up tx_rate: ge(0) rx_rate: le(0) - name: Check neighbors intent arguments slxos_interface: name: Ethernet 0/41 neighbors: - port: Ethernet 0/41 host: SLX - name: Config + intent slxos_interface: name: Ethernet 0/2 enabled: False state: down - name: Add interface using aggregate slxos_interface: aggregate: - { name: Ethernet 0/1, mtu: 1548, description: test-interface-1 } - { name: Ethernet 0/2, mtu: 1548, description: test-interface-2 } speed: 10000 state: present - name: Delete interface using aggregate slxos_interface: aggregate: - name: Loopback 9 - name: Loopback 10 state: absent
Common return values are documented here, the following are the fields unique to this module:
Key | Returned | Description |
---|---|---|
commands list | always, except for the platforms that use Netconf transport to manage the device. | The list of configuration mode commands to send to the device. Sample: ['interface Ethernet 0/2', 'description test-interface', 'mtu 1548'] |
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
This module is flagged as community which means that it is maintained by the Ansible Community. See Module Maintenance & Support for more info.
For a list of other modules that are also maintained by the Ansible Community, see here.
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/slxos_interface_module.html