New in version 2.5.
The below requirements are needed on the host that executes this module.
Parameter | Choices/Defaults | Comments |
---|---|---|
default_gw | Default: 0.0.0.0 | The default gateway associated with the IPv4 addresses in the block. |
descrption | The user-defined description of the IP address pool. Enter up to 256 characters. You can use any characters or spaces except the following: ` (accent mark), (backslash), ^ (carat), " (double quote), = (equal sign), > (greater than), < (less than), or ' (single quote). aliases: descr | |
first_addr | The first IPv4 address in the IPv4 addresses block. This is the From field in the UCS Manager Add IPv4 Blocks menu. | |
hostname str required | IP address or hostname of Cisco UCS Manager. | |
ipv6_default_gw | Default: :: | The default gateway associated with the IPv6 addresses in the block. |
ipv6_first_addr | The first IPv6 address in the IPv6 addresses block. This is the From field in the UCS Manager Add IPv6 Blocks menu. | |
ipv6_last_addr | The last IPv6 address in the IPv6 addresses block. This is the To field in the UCS Manager Add IPv6 Blocks menu. | |
ipv6_prefix | Default: 64 | The network address prefix associated with the IPv6 addresses in the block. |
ipv6_primary_dns | Default: :: | The primary DNS server that this block of IPv6 addresses should access. |
ipv6_secondary_dns | Default: :: | The secondary DNS server that this block of IPv6 addresses should access. |
last_addr | The last IPv4 address in the IPv4 addresses block. This is the To field in the UCS Manager Add IPv4 Blocks menu. | |
name required | The name of the IP address pool. This name can be between 1 and 32 alphanumeric characters. You cannot use spaces or any special characters other than - (hyphen), "_" (underscore), : (colon), and . (period). You cannot change this name after the IP address pool is created. | |
order |
| The Assignment Order field. This can be one of the following: default - Cisco UCS Manager selects a random identity from the pool. sequential - Cisco UCS Manager selects the lowest available identity from the pool. |
org_dn | Default: org-root | Org dn (distinguished name) |
password str required | Password for Cisco UCS Manager authentication. | |
port int | Port number to be used during connection (by default uses 443 for https and 80 for http connection). | |
primary_dns | Default: 0.0.0.0 | The primary DNS server that this block of IPv4 addresses should access. |
proxy str | If use_proxy is no, specfies proxy to be used for connection. e.g. 'http://proxy.xy.z:8080' | |
secondary_dns | Default: 0.0.0.0 | The secondary DNS server that this block of IPv4 addresses should access. |
state |
| If present , will verify IP pool is present and will create if needed.If absent , will verify IP pool is absent and will delete if needed. |
subnet_mask | Default: 255.255.255.0 | The subnet mask associated with the IPv4 addresses in the block. |
use_proxy bool |
| If no , will not use the proxy as defined by system environment variable. |
use_ssl bool |
| If no , an HTTP connection will be used instead of the default HTTPS connection. |
username str | Default: admin | Username for Cisco UCS Manager authentication. |
- name: Configure IPv4 address pools ucs_ip_pool: hostname: 172.16.143.150 username: admin password: password name: ip-A order: sequential first_addr: 192.168.0.10 last_addr: 192.168.0.19 subnet_mask: 255.255.255.0 default_gw: 192.168.0.1 primary_dns: 172.16.143.136 - name: Configure IPv6 address pools ucs_ip_pool: hostname: 172.16.143.150 username: admin password: password name: ipv6-B ipv6_first_addr: fe80::1cae:7992:d7a1:ed07 ipv6_last_addr: fe80::1cae:7992:d7a1:edfe ipv6_default_gw: fe80::1cae:7992:d7a1:ecff - name: Remove IPv4 address pools ucs_ip_pool: hostname: 172.16.143.150 username: admin password: password name: ip-A state: absent - name: Remove IPv6 address pools ucs_ip_pool: hostname: 172.16.143.150 username: admin password: password name: ipv6-B state: absent
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
This module is flagged as community which means that it is maintained by the Ansible Community. See Module Maintenance & Support for more info.
For a list of other modules that are also maintained by the Ansible Community, see here.
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.7/modules/ucs_ip_pool_module.html