W3cubDocs

/Graphite

Configuring Carbon

Carbon’s config files all live in /opt/graphite/conf/. If you’ve just installed Graphite, none of the .conf files will exist yet, but there will be a .conf.example file for each one. Simply copy the example files, removing the .example extension, and customize your settings.

pushd /opt/graphite/conf
cp carbon.conf.example carbon.conf
cp storage-schemas.conf.example storage-schemas.conf

The example defaults are sane, but they may not meet your information resolution needs or storage limitations.

carbon.conf

This is the main config file, and defines the settings for each Carbon daemon.

Each setting within this file is documented via comments in the config file itself. The settings are broken down into sections for each daemon - carbon-cache is controlled by the [cache] section, carbon-relay is controlled by [relay] and carbon-aggregator by [aggregator]. However, if this is your first time using Graphite, don’t worry about anything but the [cache] section for now.

Tip

Carbon-cache and carbon-relay can run on the same host! Try swapping the default ports listed for LINE_RECEIVER_PORT and PICKLE_RECEIVER_PORT between the [cache] and [relay] sections to prevent having to reconfigure your deployed metric senders. When setting DESTINATIONS in the [relay] section, keep in mind your newly-set PICKLE_RECEIVER_PORT in the [cache] section.

storage-schemas.conf

This configuration file details retention rates for storing metrics. It matches metric paths to patterns, and tells whisper what frequency and history of datapoints to store.

Important notes before continuing:

  • There can be many sections in this file.
  • The sections are applied in order from the top (first) and bottom (last).
  • The patterns are regular expressions, as opposed to the wildcards used in the URL API.
  • The first pattern that matches the metric name is used.
  • This retention is set at the time the first metric is sent.
  • Changing this file will not affect already-created .wsp files. Use whisper-resize.py to change those.

A given rule is made up of 3 lines:

  • A name, specified inside square brackets.
  • A regex, specified after “pattern=”
  • A retention rate line, specified after “retentions=”

The retentions line can specify multiple retentions. Each retention of frequency:history is separated by a comma.

Frequencies and histories are specified using the following suffixes:

  • s - second
  • m - minute
  • h - hour
  • d - day
  • w - week
  • y - year

Here’s a simple, single retention example:

[garbage_collection]
pattern = garbageCollections$
retentions = 10s:14d

The name [garbage_collection] is mainly for documentation purposes, and will show up in creates.log when metrics matching this section are created.

The regular expression pattern will match any metric that ends with garbageCollections. For example, com.acmeCorp.instance01.jvm.memory.garbageCollections would match, but com.acmeCorp.instance01.jvm.memory.garbageCollections.full would not.

The retentions line is saying that each datapoint represents 10 seconds, and we want to keep enough datapoints so that they add up to 14 days of data.

Here’s a more complicated example with multiple retention rates:

[apache_busyWorkers]
pattern = ^servers\.www.*\.workers\.busyWorkers$
retentions = 15s:7d,1m:21d,15m:5y

In this example, imagine that your metric scheme is servers.<servername>.<metrics>. The pattern would match server names that start with ‘www’, followed by anything, that are sending metrics that end in ‘.workers.busyWorkers’ (note the escaped ‘.’ characters).

Additionally, this example uses multiple retentions. The general rule is to specify retentions from most-precise:least-history to least-precise:most-history – whisper will properly downsample metrics (averaging by default) as thresholds for retention are crossed.

By using multiple retentions, you can store long histories of metrics while saving on disk space and I/O. Because whisper averages (by default) as it downsamples, one is able to determine totals of metrics by reversing the averaging process later on down the road.

Example: You store the number of sales per minute for 1 year, and the sales per hour for 5 years after that. You need to know the total sales for January 1st of the year before. You can query whisper for the raw data, and you’ll get 24 datapoints, one for each hour. They will most likely be floating point numbers. You can take each datapoint, multiply by 60 (the ratio of high-precision to low-precision datapoints) and still get the total sales per hour.

Additionally, whisper supports a legacy retention specification for backwards compatibility reasons - seconds-per-datapoint:count-of-datapoints

retentions = 60:1440

60 represents the number of seconds per datapoint, and 1440 represents the number of datapoints to store. This required some unnecessarily complicated math, so although it’s valid, it’s not recommended.

storage-aggregation.conf

This file defines how to aggregate data to lower-precision retentions. The format is similar to storage-schemas.conf. Important notes before continuing:

  • This file is optional. If it is not present, defaults will be used.
  • The sections are applied in order from the top (first) and bottom (last), similar to storage-schemas.conf.
  • The first pattern that matches the metric name is used, similar to storage-schemas.conf.
  • There is no retentions line. Instead, there are xFilesFactor and/or aggregationMethod lines.
  • xFilesFactor should be a floating point number between 0 and 1, and specifies what fraction of the previous retention level’s slots must have non-null values in order to aggregate to a non-null value. The default is 0.5.
  • aggregationMethod specifies the function used to aggregate values for the next retention level. Legal methods are average, sum, min, max, and last. The default is average.
  • These are set at the time the first metric is sent.
  • Changing this file will not affect .wsp files already created on disk. Use whisper-set-aggregation-method.py to change those.

Here’s an example:

[all_min]
pattern = \.min$
xFilesFactor = 0.1
aggregationMethod = min

The pattern above will match any metric that ends with .min.

The xFilesFactor line is saying that a minimum of 10% of the slots in the previous retention level must have values for next retention level to contain an aggregate. The aggregationMethod line is saying that the aggregate function to use is min.

If either xFilesFactor or aggregationMethod is left out, the default value will be used.

The aggregation parameters are kept separate from the retention parameters because the former depends on the type of data being collected and the latter depends on volume and importance.

If you want to change aggregation methods for existing data, be sure that you update the whisper files as well.

Example:

/opt/graphite/bin/whisper-set-aggregation-method.py /opt/graphite/storage/whisper/test.wsp max

This example sets the aggregation for the test.wsp to max. (The location of the python script depends on your installation)

relay-rules.conf

Relay rules are used to send certain metrics to a certain backend. This is handled by the carbon-relay system. It must be running for relaying to work. You can use a regular expression to select the metrics and define the servers to which they should go with the servers line.

Example:

[example]
pattern = ^mydata\.foo\..+
servers = 10.1.2.3, 10.1.2.4:2004, myserver.mydomain.com

You must define at least one section as the default.

aggregation-rules.conf

Aggregation rules allow you to add several metrics together as they come in, reducing the need to sum() many metrics in every URL. Note that unlike some other config files, any time this file is modified it will take effect automatically. This requires the carbon-aggregator service to be running.

The form of each line in this file should be as follows:

output_template (frequency) = method input_pattern

This will capture any received metrics that match input_pattern for calculating an aggregate metric. The calculation will occur every frequency seconds using a valid method. The name of the aggregate metric will be derived from output_template filling in any captured fields from input_pattern. Any metric that will arrive to carbon-aggregator will proceed to its output untouched unless it is overridden by some rule.

Available aggregation methods are: sum, avg, min, max, p50, p75, p80, p90, p95, p99, p999, and count - where p50 means 50th percentile and p999 means 99.9th percentile, etc.

Care should be taken when using percentile aggregation methods because re-aggregation does not work the way you might expect. The utility of percentile aggregation however means they are provided if you wish to use them.

For example, if your metric naming scheme is:

<env>.applications.<app>.<server>.<metric>

You could configure some aggregations like so:

<env>.applications.<app>.all.requests (60) = sum <env>.applications.<app>.*.requests
<env>.applications.<app>.all.latency (60) = avg <env>.applications.<app>.*.latency

As an example, if the following metrics are received:

prod.applications.apache.www01.requests
prod.applications.apache.www02.requests
prod.applications.apache.www03.requests
prod.applications.apache.www04.requests
prod.applications.apache.www05.requests

They would all go into the same aggregation buffer and after 60 seconds the aggregate metric prod.applications.apache.all.requests would be calculated by summing their values.

Template components such as <env> will match everything up to the next dot. To match metric multiple components including the dots, use <<metric>> in the input template:

<env>.applications.<app>.all.<app_metric> (60) = sum <env>.applications.<app>.*.<<app_metric>>

It is also possible to use regular expressions. Following the example above when using:

<env>.applications.<app>.<domain>.requests (60) = sum <env>.applications.<app>.<domain>\d{2}.requests

You will end up with prod.applications.apache.www.requests instead of prod.applications.apache.all.requests.

Another common use pattern of carbon-aggregator is to aggregate several data points of the same metric. This could come in handy when you have got the same metric coming from several hosts, or when you are bound to send data more frequently than your shortest retention.

rewrite-rules.conf

Rewrite rules allow you to rewrite metric names using Python regular expressions. Note that unlike some other config files, any time this file is modified it will take effect automatically. This requires the carbon-aggregator service to be running.

The form of each line in this file should be as follows:

regex-pattern = replacement-text

This will capture any received metrics that match ‘regex-pattern’ and rewrite the matched portion of the text with ‘replacement-text’. The ‘regex-pattern’ must be a valid Python regular expression, and the ‘replacement-text’ can be any value. You may also use capture groups:

^collectd\.([a-z0-9]+)\. = \1.system.

Which would result in:

collectd.prod.cpu-0.idle-time => prod.system.cpu-0.idle-item

rewrite-rules.conf consists of two sections, [pre] and [post]. The rules in the pre section are applied to metric names as soon as they are received. The post rules are applied after aggregation has taken place.

For example:

[post]
_sum$ =
_avg$ =

These rules would strip off a suffix of _sum or _avg from any metric names after aggregation.

Note: if you plan to use the = sign in your rewrite rules. Use its octal value: \075. For example foo=bar = foo.bar would be foo\075bar = foo.bar

whitelist and blacklist

The whitelist functionality allows any of the carbon daemons to only accept metrics that are explicitly whitelisted and/or to reject blacklisted metrics. The functionality can be enabled in carbon.conf with the USE_WHITELIST flag. This can be useful when too many metrics are being sent to a Graphite instance or when there are metric senders sending useless or invalid metrics.

GRAPHITE_CONF_DIR is searched for whitelist.conf and blacklist.conf. Each file contains one regular expressions per line to match against metric values. If the whitelist configuration is missing or empty, all metrics will be passed through by default.

© 2008–2012 Chris Davis
© 2011–2016 The Graphite Project
Licensed under the Apache License, Version 2.0.
https://graphite.readthedocs.io/en/latest/config-carbon.html