The net
module provides an asynchronous network API for creating stream-based TCP or IPC servers (net.createServer()
) and clients (net.createConnection()
).
It can be accessed using:
const net = require('net');
The net
module supports IPC with named pipes on Windows, and UNIX domain sockets on other operating systems.
net.connect()
, net.createConnection()
, server.listen()
and socket.connect()
take a path
parameter to identify IPC endpoints.
On UNIX, the local domain is also known as the UNIX domain. The path is a filesystem pathname. It gets truncated to sizeof(sockaddr_un.sun_path) - 1
, which varies on different operating system between 91 and 107 bytes. The typical values are 107 on Linux and 103 on macOS. The path is subject to the same naming conventions and permissions checks as would be done on file creation. If the UNIX domain socket (that is visible as a file system path) is created and used in conjunction with one of Node.js' API abstractions such as net.createServer()
, it will be unlinked as part of server.close()
. On the other hand, if it is created and used outside of these abstractions, the user will need to manually remove it. The same applies when the path was created by a Node.js API but the program crashes abruptly. In short, a UNIX domain socket once successfully created will be visible in the filesystem, and will persist until unlinked.
On Windows, the local domain is implemented using a named pipe. The path must refer to an entry in \\?\pipe\
or \\.\pipe\
. Any characters are permitted, but the latter may do some processing of pipe names, such as resolving ..
sequences. Despite how it might look, the pipe namespace is flat. Pipes will not persist. They are removed when the last reference to them is closed. Unlike UNIX domain sockets, Windows will close and remove the pipe when the owning process exits.
JavaScript string escaping requires paths to be specified with extra backslash escaping such as:
net.createServer().listen( path.join('\\\\?\\pipe', process.cwd(), 'myctl'));
This class is used to create a TCP or IPC server.
options
<Object> See net.createServer([options][, connectionListener])
.connectionListener
<Function> Automatically set as a listener for the 'connection'
event.net.Server
is an EventEmitter
with the following events:
Emitted when the server closes. Note that if connections exist, this event is not emitted until all connections are ended.
Emitted when a new connection is made. socket
is an instance of net.Socket
.
Emitted when an error occurs. Unlike net.Socket
, the 'close'
event will not be emitted directly following this event unless server.close()
is manually called. See the example in discussion of server.listen()
.
Emitted when the server has been bound after calling server.listen()
.
Returns the bound address
, the address family
name, and port
of the server as reported by the operating system if listening on an IP socket (useful to find which port was assigned when getting an OS-assigned address): { port: 12346, family: 'IPv4', address: '127.0.0.1' }
.
For a server listening on a pipe or UNIX domain socket, the name is returned as a string.
const server = net.createServer((socket) => { socket.end('goodbye\n'); }).on('error', (err) => { // handle errors here throw err; }); // grab an arbitrary unused port. server.listen(() => { console.log('opened server on', server.address()); });
Don't call server.address()
until the 'listening'
event has been emitted.
callback
<Function> Called when the server is closedStops the server from accepting new connections and keeps existing connections. This function is asynchronous, the server is finally closed when all connections are ended and the server emits a 'close'
event. The optional callback
will be called once the 'close'
event occurs. Unlike that event, it will be called with an Error
as its only argument if the server was not open when it was closed.
server.getConnections()
instead.The number of concurrent connections on the server.
This becomes null
when sending a socket to a child with child_process.fork()
. To poll forks and get current number of active connections use asynchronous server.getConnections()
instead.
callback
<Function>
Asynchronously get the number of concurrent connections on the server. Works when sockets were sent to forks.
Callback should take two arguments err
and count
.
Start a server listening for connections. A net.Server
can be a TCP or an IPC server depending on what it listens to.
Possible signatures:
server.listen(handle[, backlog][, callback])
server.listen(options[, callback])
server.listen(path[, backlog][, callback])
for IPC serversserver.listen([port[, host[, backlog]]][, callback])
for TCP servers This function is asynchronous. When the server starts listening, the 'listening'
event will be emitted. The last parameter callback
will be added as a listener for the 'listening'
event.
All listen()
methods can take a backlog
parameter to specify the maximum length of the queue of pending connections. The actual length will be determined by the OS through sysctl settings such as tcp_max_syn_backlog
and somaxconn
on Linux. The default value of this parameter is 511 (not 512).
All net.Socket
are set to SO_REUSEADDR
(see socket(7)
for details).
The server.listen()
method can be called again if and only if there was an error during the first server.listen()
call or server.close()
has been called. Otherwise, an ERR_SERVER_ALREADY_LISTEN
error will be thrown.
One of the most common errors raised when listening is EADDRINUSE
. This happens when another server is already listening on the requested port
/path
/handle
. One way to handle this would be to retry after a certain amount of time:
server.on('error', (e) => { if (e.code === 'EADDRINUSE') { console.log('Address in use, retrying...'); setTimeout(() => { server.close(); server.listen(PORT, HOST); }, 1000); } });
handle
<Object>
backlog
<number> Common parameter of server.listen()
functionscallback
<Function> Common parameter of server.listen()
functionsStart a server listening for connections on a given handle
that has already been bound to a port, a UNIX domain socket, or a Windows named pipe.
The handle
object can be either a server, a socket (anything with an underlying _handle
member), or an object with an fd
member that is a valid file descriptor.
Listening on a file descriptor is not supported on Windows.
options
<Object> Required. Supports the following properties:
port
<number>
host
<string>
path
<string> Will be ignored if port
is specified. See Identifying paths for IPC connections.backlog
<number> Common parameter of server.listen()
functions.exclusive
<boolean> Default: false
readableAll
<boolean> For IPC servers makes the pipe readable for all users. Default: false
writableAll
<boolean> For IPC servers makes the pipe writable for all users. Default: false
callback
<Function> Common parameter of server.listen()
functions.If port
is specified, it behaves the same as server.listen([port[, host[, backlog]]][, callback])
. Otherwise, if path
is specified, it behaves the same as server.listen(path[, backlog][, callback])
. If none of them is specified, an error will be thrown.
If exclusive
is false
(default), then cluster workers will use the same underlying handle, allowing connection handling duties to be shared. When exclusive
is true
, the handle is not shared, and attempted port sharing results in an error. An example which listens on an exclusive port is shown below.
server.listen({ host: 'localhost', port: 80, exclusive: true });
Starting an IPC server as root may cause the server path to be inaccessible for unprivileged users. Using readableAll
and writableAll
will make the server accessible for all users.
path
<string> Path the server should listen to. See Identifying paths for IPC connections.backlog
<number> Common parameter of server.listen()
functions.callback
<Function> Common parameter of server.listen()
functions.Start an IPC server listening for connections on the given path
.
port
<number>
host
<string>
backlog
<number> Common parameter of server.listen()
functions.callback
<Function> Common parameter of server.listen()
functions.Start a TCP server listening for connections on the given port
and host
.
If port
is omitted or is 0, the operating system will assign an arbitrary unused port, which can be retrieved by using server.address().port
after the 'listening'
event has been emitted.
If host
is omitted, the server will accept connections on the unspecified IPv6 address (::
) when IPv6 is available, or the unspecified IPv4 address (0.0.0.0
) otherwise.
In most operating systems, listening to the unspecified IPv6 address (::
) may cause the net.Server
to also listen on the unspecified IPv4 address (0.0.0.0
).
Set this property to reject connections when the server's connection count gets high.
It is not recommended to use this option once a socket has been sent to a child with child_process.fork()
.
Opposite of unref()
, calling ref()
on a previously unref
ed server will not let the program exit if it's the only server left (the default behavior). If the server is ref
ed calling ref()
again will have no effect.
Calling unref()
on a server will allow the program to exit if this is the only active server in the event system. If the server is already unref
ed calling unref()
again will have no effect.
This class is an abstraction of a TCP socket or a streaming IPC endpoint (uses named pipes on Windows, and UNIX domain sockets otherwise). A net.Socket
is also a duplex stream, so it can be both readable and writable, and it is also an EventEmitter
.
A net.Socket
can be created by the user and used directly to interact with a server. For example, it is returned by net.createConnection()
, so the user can use it to talk to the server.
It can also be created by Node.js and passed to the user when a connection is received. For example, it is passed to the listeners of a 'connection'
event emitted on a net.Server
, so the user can use it to interact with the client.
options
<Object> Available options are:
fd
<number> If specified, wrap around an existing socket with the given file descriptor, otherwise a new socket will be created.allowHalfOpen
<boolean> Indicates whether half-opened TCP connections are allowed. See net.createServer()
and the 'end'
event for details. Default: false
.readable
<boolean> Allow reads on the socket when an fd
is passed, otherwise ignored. Default: false
.writable
<boolean> Allow writes on the socket when an fd
is passed, otherwise ignored. Default: false
.Creates a new socket object.
The newly created socket can be either a TCP socket or a streaming IPC endpoint, depending on what it connect()
to.
hadError
<boolean> true
if the socket had a transmission error.Emitted once the socket is fully closed. The argument hadError
is a boolean which says if the socket was closed due to a transmission error.
Emitted when a socket connection is successfully established. See net.createConnection()
.
Emitted when data is received. The argument data
will be a Buffer
or String
. Encoding of data is set by socket.setEncoding()
.
Note that the data will be lost if there is no listener when a Socket
emits a 'data'
event.
Emitted when the write buffer becomes empty. Can be used to throttle uploads.
See also: the return values of socket.write()
.
Emitted when the other end of the socket sends a FIN packet, thus ending the readable side of the socket.
By default (allowHalfOpen
is false
) the socket will send a FIN packet back and destroy its file descriptor once it has written out its pending write queue. However, if allowHalfOpen
is set to true
, the socket will not automatically end()
its writable side, allowing the user to write arbitrary amounts of data. The user must call end()
explicitly to close the connection (i.e. sending a FIN packet back).
Emitted when an error occurs. The 'close'
event will be called directly following this event.
Emitted after resolving the hostname but before connecting. Not applicable to UNIX sockets.
err
<Error> | <null> The error object. See dns.lookup()
.address
<string> The IP address.family
<string> | <null> The address type. See dns.lookup()
.host
<string> The hostname.Emitted when a socket is ready to be used.
Triggered immediately after 'connect'
.
Emitted if the socket times out from inactivity. This is only to notify that the socket has been idle. The user must manually close the connection.
See also: socket.setTimeout()
.
Returns the bound address
, the address family
name and port
of the socket as reported by the operating system: { port: 12346, family: 'IPv4', address: '127.0.0.1' }
net.Socket
has the property that socket.write()
always works. This is to help users get up and running quickly. The computer cannot always keep up with the amount of data that is written to a socket - the network connection simply might be too slow. Node.js will internally queue up the data written to a socket and send it out over the wire when it is possible. (Internally it is polling on the socket's file descriptor for being writable).
The consequence of this internal buffering is that memory may grow. This property shows the number of characters currently buffered to be written. (Number of characters is approximately equal to the number of bytes to be written, but the buffer may contain strings, and the strings are lazily encoded, so the exact number of bytes is not known.)
Users who experience large or growing bufferSize
should attempt to "throttle" the data flows in their program with socket.pause()
and socket.resume()
.
The amount of received bytes.
The amount of bytes sent.
Initiate a connection on a given socket.
Possible signatures:
socket.connect(options[, connectListener])
socket.connect(path[, connectListener])
for IPC connections.socket.connect(port[, host][, connectListener])
for TCP connections.This function is asynchronous. When the connection is established, the 'connect'
event will be emitted. If there is a problem connecting, instead of a 'connect'
event, an 'error'
event will be emitted with the error passed to the 'error'
listener. The last parameter connectListener
, if supplied, will be added as a listener for the 'connect'
event once.
options
<Object>
connectListener
<Function> Common parameter of socket.connect()
methods. Will be added as a listener for the 'connect'
event once.Initiate a connection on a given socket. Normally this method is not needed, the socket should be created and opened with net.createConnection()
. Use this only when implementing a custom Socket.
For TCP connections, available options
are:
port
<number> Required. Port the socket should connect to.host
<string> Host the socket should connect to. Default: 'localhost'
.localAddress
<string> Local address the socket should connect from.localPort
<number> Local port the socket should connect from.family
<number>: Version of IP stack, can be either 4
or 6
. Default: 4
.hints
<number> Optional dns.lookup()
hints.lookup
<Function> Custom lookup function. Default: dns.lookup()
.For IPC connections, available options
are:
path
<string> Required. Path the client should connect to. See Identifying paths for IPC connections. If provided, the TCP-specific options above are ignored.path
<string> Path the client should connect to. See Identifying paths for IPC connections.connectListener
<Function> Common parameter of socket.connect()
methods. Will be added as a listener for the 'connect'
event once.Initiate an IPC connection on the given socket.
Alias to socket.connect(options[, connectListener])
called with { path: path }
as options
.
port
<number> Port the client should connect to.host
<string> Host the client should connect to.connectListener
<Function> Common parameter of socket.connect()
methods. Will be added as a listener for the 'connect'
event once.Initiate a TCP connection on the given socket.
Alias to socket.connect(options[, connectListener])
called with {port: port, host: host}
as options
.
If true
- socket.connect(options[, connectListener])
was called and haven't yet finished. Will be set to false
before emitting 'connect'
event and/or calling socket.connect(options[, connectListener])
's callback.
exception
<Object>
Ensures that no more I/O activity happens on this socket. Only necessary in case of errors (parse error or so).
If exception
is specified, an 'error'
event will be emitted and any listeners for that event will receive exception
as an argument.
data
<string> | <Buffer> | <Uint8Array>
encoding
<string> Only used when data is string
. Default: 'utf8'
.Half-closes the socket. i.e., it sends a FIN packet. It is possible the server will still send some data.
If data
is specified, it is equivalent to calling socket.write(data, encoding)
followed by socket.end()
.
The string representation of the local IP address the remote client is connecting on. For example, in a server listening on '0.0.0.0'
, if a client connects on '192.168.1.1'
, the value of socket.localAddress
would be '192.168.1.1'
.
The numeric representation of the local port. For example, 80
or 21
.
Pauses the reading of data. That is, 'data'
events will not be emitted. Useful to throttle back an upload.
Opposite of unref()
, calling ref()
on a previously unref
ed socket will not let the program exit if it's the only socket left (the default behavior). If the socket is ref
ed calling ref
again will have no effect.
The string representation of the remote IP address. For example, '74.125.127.100'
or '2001:4860:a005::68'
. Value may be undefined
if the socket is destroyed (for example, if the client disconnected).
The string representation of the remote IP family. 'IPv4'
or 'IPv6'
.
The numeric representation of the remote port. For example, 80
or 21
.
Resumes reading after a call to socket.pause()
.
encoding
<string>
Set the encoding for the socket as a Readable Stream. See readable.setEncoding()
for more information.
enable
<boolean> Default: false
initialDelay
<number> Default: 0
Enable/disable keep-alive functionality, and optionally set the initial delay before the first keepalive probe is sent on an idle socket.
Set initialDelay
(in milliseconds) to set the delay between the last data packet received and the first keepalive probe. Setting 0
for initialDelay
will leave the value unchanged from the default (or previous) setting.
noDelay
<boolean> Default: true
Disables the Nagle algorithm. By default TCP connections use the Nagle algorithm, they buffer data before sending it off. Setting true
for noDelay
will immediately fire off data each time socket.write()
is called.
timeout
<number>
callback
<Function>
Sets the socket to timeout after timeout
milliseconds of inactivity on the socket. By default net.Socket
do not have a timeout.
When an idle timeout is triggered the socket will receive a 'timeout'
event but the connection will not be severed. The user must manually call socket.end()
or socket.destroy()
to end the connection.
socket.setTimeout(3000); socket.on('timeout', () => { console.log('socket timeout'); socket.end(); });
If timeout
is 0, then the existing idle timeout is disabled.
The optional callback
parameter will be added as a one-time listener for the 'timeout'
event.
Calling unref()
on a socket will allow the program to exit if this is the only active socket in the event system. If the socket is already unref
ed calling unref()
again will have no effect.
data
<string> | <Buffer> | <Uint8Array>
encoding
<string> Only used when data is string
. Default: utf8
.callback
<Function>
Sends data on the socket. The second parameter specifies the encoding in the case of a string — it defaults to UTF8 encoding.
Returns true
if the entire data was flushed successfully to the kernel buffer. Returns false
if all or part of the data was queued in user memory. 'drain'
will be emitted when the buffer is again free.
The optional callback
parameter will be executed when the data is finally written out - this may not be immediately.
See Writable
stream write()
method for more information.
Aliases to net.createConnection()
.
Possible signatures:
net.connect(options[, connectListener])
net.connect(path[, connectListener])
for IPC connections.net.connect(port[, host][, connectListener])
for TCP connections.options
<Object>
connectListener
<Function> Alias to net.createConnection(options[, connectListener])
.path
<string>
connectListener
<Function>
Alias to net.createConnection(path[, connectListener])
.
port
<number>
host
<string>
connectListener
<Function>
Alias to net.createConnection(port[, host][, connectListener])
.
A factory function, which creates a new net.Socket
, immediately initiates connection with socket.connect()
, then returns the net.Socket
that starts the connection.
When the connection is established, a 'connect'
event will be emitted on the returned socket. The last parameter connectListener
, if supplied, will be added as a listener for the 'connect'
event once.
Possible signatures:
net.createConnection(options[, connectListener])
net.createConnection(path[, connectListener])
for IPC connections.net.createConnection(port[, host][, connectListener])
for TCP connections.The net.connect()
function is an alias to this function.
options
<Object> Required. Will be passed to both the new net.Socket([options])
call and the socket.connect(options[, connectListener])
method.connectListener
<Function> Common parameter of the net.createConnection()
functions. If supplied, will be added as a listener for the 'connect'
event on the returned socket once.For available options, see new net.Socket([options])
and socket.connect(options[, connectListener])
.
Additional options:
timeout
<number> If set, will be used to call socket.setTimeout(timeout)
after the socket is created, but before it starts the connection.Following is an example of a client of the echo server described in the net.createServer()
section:
const net = require('net'); const client = net.createConnection({ port: 8124 }, () => { // 'connect' listener console.log('connected to server!'); client.write('world!\r\n'); }); client.on('data', (data) => { console.log(data.toString()); client.end(); }); client.on('end', () => { console.log('disconnected from server'); });
To connect on the socket /tmp/echo.sock
the second line would just be changed to:
const client = net.createConnection({ path: '/tmp/echo.sock' });
path
<string> Path the socket should connect to. Will be passed to socket.connect(path[, connectListener])
. See Identifying paths for IPC connections.connectListener
<Function> Common parameter of the net.createConnection()
functions, an "once" listener for the 'connect'
event on the initiating socket. Will be passed to socket.connect(path[, connectListener])
.Initiates an IPC connection.
This function creates a new net.Socket
with all options set to default, immediately initiates connection with socket.connect(path[, connectListener])
, then returns the net.Socket
that starts the connection.
port
<number> Port the socket should connect to. Will be passed to socket.connect(port[, host][, connectListener])
.host
<string> Host the socket should connect to. Will be passed to socket.connect(port[, host][, connectListener])
. Default: 'localhost'
.connectListener
<Function> Common parameter of the net.createConnection()
functions, an "once" listener for the 'connect'
event on the initiating socket. Will be passed to socket.connect(path[, connectListener])
.Initiates a TCP connection.
This function creates a new net.Socket
with all options set to default, immediately initiates connection with socket.connect(port[, host][, connectListener])
, then returns the net.Socket
that starts the connection.
options
<Object>
connectionListener
<Function>
Creates a new TCP or IPC server.
options
<Object>
connectionListener
<Function> Automatically set as a listener for the 'connection'
event.If allowHalfOpen
is set to true
, when the other end of the socket sends a FIN packet, the server will only send a FIN packet back when socket.end()
is explicitly called, until then the connection is half-closed (non-readable but still writable). See 'end'
event and RFC 1122 (section 4.2.2.13) for more information.
If pauseOnConnect
is set to true
, then the socket associated with each incoming connection will be paused, and no data will be read from its handle. This allows connections to be passed between processes without any data being read by the original process. To begin reading data from a paused socket, call socket.resume()
.
The server can be a TCP server or an IPC server, depending on what it listen()
to.
Here is an example of an TCP echo server which listens for connections on port 8124:
const net = require('net'); const server = net.createServer((c) => { // 'connection' listener console.log('client connected'); c.on('end', () => { console.log('client disconnected'); }); c.write('hello\r\n'); c.pipe(c); }); server.on('error', (err) => { throw err; }); server.listen(8124, () => { console.log('server bound'); });
Test this by using telnet
:
$ telnet localhost 8124
To listen on the socket /tmp/echo.sock
the third line from the last would just be changed to:
server.listen('/tmp/echo.sock', () => { console.log('server bound'); });
Use nc
to connect to a UNIX domain socket server:
$ nc -U /tmp/echo.sock
Tests if input is an IP address. Returns 0
for invalid strings, returns 4
for IP version 4 addresses, and returns 6
for IP version 6 addresses.
Returns true
if input is a version 4 IP address, otherwise returns false
.
Returns true
if input is a version 6 IP address, otherwise returns false
.
© Joyent, Inc. and other Node contributors
Licensed under the MIT License.
Node.js is a trademark of Joyent, Inc. and is used with its permission.
We are not endorsed by or affiliated with Joyent.
https://nodejs.org/dist/latest-v10.x/docs/api/net.html